•
The maximum permitted temperature inside the reac-
tor vessel is 230 °C. Do not exceed this temperature.
•
Before you fill the reactor vessel, ensure that the
reagents used do not corrode the seal!
Accessories
•
Only use IKA approved accessories!
•
Use only original IKA spare parts!
•
Protect the instrument and accessories from bumping
and impacting.
•
Please observe the permitted speed for the stirring
element. Never set higher speed.
Assembly
Ensure that the stirring tool is
WARNING
securely fixed.
Broken glass! Fit the hose cou-
CAUTION
pling carefully.
• Fix all hoses in the laboratory extractor hood.
• Ensure that the glass assembly is tension-free! Danger
of cracking as a result of:
- stress due to incorrect assembly,
- external mechanical hazards,
- local temperature peaks.
16
Stand
Undo the screws on the stand
CAUTION
carefully.
balance the stand can move
upwards uncontrollably.
Protection of the device
•
The voltage stated on the type plate must correspond
to the mains voltage.
•
Socket must be earthed (protective ground contact).
•
Covering or parts that are capable of being removed from
the unit without accessory equipment have to be reat-
tached to the unit for safe operation in order to prevent,
for example, the ingress of fluids, foreign matter, etc..
•
The device may only be opened by experts.
Without
counter