Magmaweld ID 300 T DC PULSE Mode D'emploi page 19

ID 300 T DC PULSE / ID 300 TW DC PULSE
• Adjustable Pedal Connection; It should be secured to the pedal socket with the ends 3-4-5-6.
(3) Soldering direction has been taken as the reference.
• Insert the grounding clamps cable plug (a) into the positive
2.5.4 Grounding Clamps Connections
terminal socket and tighten it by turning right.
• To improve the welding quality, firmly connect the grounding
pliers (b) to the workpiece as close as possible to the welding
area.
• The ceramic gas nozzle (5) and the tungsten electrode (1) must be selected according to the operating current
2.5.5 Installation of Torch Consumables
and the shape of the workpiece. Accordingly, the diameters of the clamp (3) and the clamp holder (4) must
match with the diameter of the tungsten electrode.
• Remove the clamping cap (2).
• Remove the existing electrode from the electrode clamp and match the diameter of the new tungsten electrode.
• Secure the collect to the torch.
• Secure the clamping cap firmly head firmly.
4
5
Figure 5 : Installation of Torch Consumables
www.magmaweld.com
b
Figure 4 : Grounding Clamps Connections
1
3
Installation
a
USER MANUAL
19
EN