Magmaweld ID 300 T DC PULSE Mode D'emploi page 14

14 Technical Information
Temperature (C°)
Duty Cycle
EN
As defined in the standard EN 60974-1, the duty cycle rate includes a time period of 10 minutes.
6 min.
For example, if a machine specified as 250A at %60 is to be operated at 250A, the machine can weld / cut
without interruption in the first 6 minutes of the 10 minutes period (zone 1). However, the following
4 minutes should be kept idle for the machine cool down (zone 2).
1.4 Technical Data
Mains Voltage (3-phase 50-60 Hz)
TECHNICAL DATA
Rated Power (MMA)
Rated Power (TIG)
Power Source Efficiency
IDLE State Power Consumption
Welding Current Range
Rated Welding Current
Open Circuit Voltage
Stick Electrode Diameter Range
Tungsten Electrode Diameter Range
Dimensions (l x w x h)
Weight
Protection Class
USER MANUAL
4 min. 6 min.
V
UNIT
kVA
kVA
%
kW
ADC
ADC
VDC
mm
mm
mm
kg
ID 300 T DC PULSE / ID 300 TW DC PULSE
4 min. 6 min.
ID 300 T DC PULSE
400
ID 300 TW DC PULSE
16.1 (%30)
12.3 (%30)
MMA 86,74 / TIG 85,63
5 - 300
300 (%30)
1.60 - 5.00
1.00 - 2.40
598 x 252 x 661
22.5
IP 21S
Time (min.)
4 min.
29
85
www.magmaweld.com