Magmaweld ID 300 T DC PULSE Mode D'emploi page 11

ID 300 T DC PULSE / ID 300 TW DC PULSE
TECHNICAL INFORMATION
1.1 General Information
ID 300 T DC PULSE and ID 300 TW DC PULSE are inverter type, 3-phase Pulse DC TIG and MMA welding
machine. It is designed for TIG welding of other metals except aluminum and MMA welding up to 5 mm
diameter. It features advanced professional TIG controls such as HF ignition, touch start, pregas, upslope,
pulse, downslope, postgas, and crater filling. Rutile, Basic and Cellulosic options are available in MMA mode.
In TIG mode, 10 work programs can be stored in memory and can be selected according to the job, giving the
opportunity to regain exactly the same weld. All welding parameters can be adjusted via the control panel and
monitored via digital displays. It can also be used with a generator that will provide the appropriate power
and frequency. It can also be used with welding cables up to 25 meters long. The machine is fan cooled and
thermally protected against overheating.
1.2 Machine Components
1
2
3
4
5
1- Torch Strap
2- Control Panel
3- Pedal Control Connections
4- Earth Cable and Welding Cable Socket (+) 10- Remote Connection Input
5- Gas Output
6- Parameter Adjustment Pot
www.magmaweld.com
9
6
10
7
8
7- Torch Control Connections
Figure 1 : ID 300 T DC PULSE
8- Earth Cable and Welding Cable Socket (-)
9- Gas Input
11- Power Switch
12- Line Cable Inlet
Technical Information 11
11
12
USER MANUAL
EN