Eaton Tripp Lite Serie Mode D'emploi page 20

Command Line Interface
Table 3. CLI Commands (Continued)
User Command Name
get_proxy_status
set_proxy_disable
set_proxy_enable
set_proxy_username
set_proxy_password
get_proxy_username
get_proxy_password
get_sntp_server1
get_sntp_server2
get_sntp_server3
get_sntp_status
get_sntp_service
set_sntp_disable
set_sntp_enable
get_primary_dns
get_secondary_dns
get_time
get_iot_connection_
status
get_iot_connection
get_iot_connection_
reason
get_iot_dps_endpoint
14 Eaton Tripp Lite Series Cloud Connected UPS Systems User Guide 934859—Rev C
Description Sample Input/Output
Get the status of proxy PROXY is not enabled.
Disable proxy PROXY is disabled.
Enable proxy PROXY is enabled.
<username>
Set the proxy username
Set the proxy password <password>
Get the proxy username PROXY username is
<username>
Get the proxy password PROXY password is
<password>
Get the SNTP Server 1 IP SNTP server 1 IP
address or Host Name Address/Domain name:
129.6.15.28
Get the SNTP Server 2 IP SNTP server 2 IP
address or Host Name Address/Domain name:
132.163.96.1
Get the SNTP Server 3 IP SNTP server 3 IP
address or Host Name Address/Domain name:
132.163.97.1
Get SNTP Server status SNTP service enabled.
Get SNTP Server SNTP service connected
connection to server 1.
Set SNTP Server disable SNTP server disabled
successfully.
Set SNTP Server enable SNTP server enabled
successfully.
Get the primary dns Primary DNS: 8.8.8.8
Get the secondary dns Secondary DNS:
192.168.0.1
Get the current time of Epoch Time from RTC
system (seconds) - 1692282558
Get IOT connection status IOT Connection is
enabled.
Get IOT DPS connection IOT Connected.
Get IOT Connection IoT initial state.
status and reason.
Get IOT DPS endpoint. IOT DPS endpoint -
global.azure-devices-
provisioning.net
Note
Sets the username for proxy. The length of
username must not exceed 21 characters.
Sets the username for proxy. The length of
username must not exceed 21 characters.
This will print out stars(*) only after
commissioning
Time since epoch