Eaton Tripp Lite Serie Mode D'emploi page 21

Table 3. CLI Commands (Continued)
User Command Name
about Print out versions and
serial numbers
get_device_connection Get the deviceID and
ConnectionString
dump_json_formatted_ DEBUG: Dump JSON
logs
formatted logs
clear_logs Clear all logs from NV
show_logs Show all logs
reboot_card Reboot the card
factory_reset_card Factory reset the card
Description Sample Input/Output
Network Card Serial
Number
Network Card Firmware
Part Number: FW-3114
Network Card Firmware
Version: 0.9.0
Device Serial Number:
3302AVLBC884A00019
Device Firmware Part
Number: FW-2B13
Device Firmware
Version: 02
Device Profile ID:
2c389aea-edfe-ed11-
907c-0022481cd9be
Device Profile Version:
16
NFC Version: 8003.6
CLI version: 8002.22
Device GUID/UUID -
<device GUID/UUID>
Device Connection String
- <Connection String>
Event Log is currently
Empty!
N/A
N/A
Eaton Tripp Lite Series Cloud Connected UPS Systems User Guide 934859—Rev C
Command Line Interface
Note
Network Card Serial number will be shown
once it's set.
This will print out stars(*) for connection string
only after commissioning
Output size might be bigger than 200
characters
Output size might be bigger than 200
characters
Keep the last changes(if any) to the network
settings(IPV4) and password intact. This
command reboots the card to complete the
network settings configuration.
Returns the network settings (IPV4) and
password back to default values.
15