Kontron Solar SolBrid 10-3-2 Instructions D'installation Et De Mise En Service page 31

Installation and commissioning instructions
SolBrid
AC output side (grid connection)
Output voltage
Nominal output voltage
Nominal output current
Maximum output current
= Maximum output fault current
Maximum active power (cos phi = 1)
Maximum apparent power (cos phi = 1)
Nominal power
Nominal frequency
Grid frequency range
Power loss during nighttime operation
Feed-in phases
Distortion factor (cos phi = 1)
Power factor cos phi
Highest output fault current = max. output current
Initial value of the symmetrical short-circuit current Ik' (Inital
short-circuit AC current)
Max. Switch-on current (ampere peak and duration)
Characterisation of the operating behaviour
Maximum efficiency
European efficiency
MPP efficiency
Own consumption @ UPV
nom
Power derating at full power from @ UPV
Safety
Isolation principle
Grid monitoring (mains and system protection)
Residual current monitoring
Compatibility with external residual current devices (RCD)
Protection class
Topology
Z02 | 2404 | 780.767
10-3-2
nom
The inverter cannot cause a DC residual current due to
Technical data
10-3-4
3 x 185 V ... 276 V
3 x 230 V
14.49 A
16 A
10000 W
10000 VA
10000 W
50 Hz
45 Hz - 55 Hz
< 6 W
Three-phase
< 3 %
0.8 capacitive ... 0.8 inductive
16 A
16 A
109A, 10µs
97,5
97,1
> 99.7 % static, > 99 % dynamic
< 60 W
40 °C
(Tamb)
No galvanic separation, without transformer
Yes, integrated
Yes, integrated
the design.
RCD Type A
I (protective grounding)
Without transformer
DE
EN EN
FR
IT
SV
NO
FI
31