Publicité
Les langues disponibles
Les langues disponibles
Installation and commissioning instructions
This document must be kept to hand at the site of use of the inverter.
„
In case of a change of ownership pass on the document with the inverter.
This document must have been read and understood in full before installing and commissioning the inverter.
„
Do not change nor remove any factory-applied labels on the inverter.
„
Observe the connection ratings specified on the type plate.
„
Lay the cables such that the connection cannot come loose accidentally.
„
Ensure that the fire safety measures of the building are not impaired when routing cables for the device.
„
Observe all applicable installation regulations and standards, national laws and connection values specified
„
by the regional power supply company, along with the general and national safety and accident prevention
regulations.
2.4
Labels and symbols
2.4.1
Safety marks
The following safety marks are used on the inverter and in these instructions:
Warning sign
Nature of the danger
Warning of hazardous voltage
Warning of hazardous area
Warning of hot surface
Disposal information (separate collection of electrical and electronic equipment)
2.4.2
Keywords
The following keywords are used in these instructions:
Keyword
Meaning
DANGER
Indicates a hazardous situation which, if not avoided, leads to death or serious
injuries.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may lead to death
or serious injuries.
NOTE
Indicates a potentially hazardous situation which, if not avoided, may lead to dam-
age to property and/or the environment.
Z02 | 2404 | 780.767
Safety
DE
EN
EN
FR
IT
SV
NO
FI
25
Publicité
