Bosch Kiox BUI330 Notice D'utilisation D'origine page 19

Displays and settings of the on-board computer
Note: All screenshots showing the display and text on
the following pages are from the approved software
version. The display, text and/or functions may
change following a software update.
Operating logic
You can use the < (10) and > (8) buttons to switch
between the different riding value information pages
(even while riding). This way, you can keep both
hands on the handlebars while cycling.
You can use the + (12) and – (11) buttons to in-
crease or decrease the assistance level.
The <Settings> that can be accessed via the Status
screen cannot be changed while riding.
You can use the select button (9) to perform the fol-
lowing functions:
– You can access the quick menu while riding.
– You can access the settings menu from the Status
screen while stationary.
– You can confirm values and acknowledge informa-
tive hints.
– You can exit a dialog.
If the on-board computer is removed from its holder
and not switched off, it will display information re-
garding the last journey, as well as status information.
Press the bike lights button (3) to go to the next page.
If no button is pressed after the on-board computer is
removed from the holder, it will switch itself off after
1 minute.
Screen sequence
Provided the on-board computer is fitted to the
holder, you can view the following displays one after
the other:
1. Start page
2. Time and range
3. Distance and journey time
4. My performance, cadence and heart rate
5. Average and maximum speed
6. Distance, range, my performance and heart rate
7. Gradient, calories burned and total distance
Bosch eBike Systems
8. Information page for navigation:
<Plan a route in the eBike Connect Smartphone
app>
9. Status page
Start page
When you insert the on-board computer into the
holder while it is switched on for the first time, it will
display the following start page. The on-board com-
puter will then remember the last page shown and
display it when switching on the on-board computer.
b
12:58
a
k
j
24
i
h
g
a Time/speed indicator
b Riding mode indicator
c Lighting indicator
d Battery charge indicator of eBike battery
e Unit of speed indicator
f Speed
g Connection status
h Navigation bar
i Drive power
j Your performance
k Performance evaluation
a) Can be changed between km/h and mph via the status
page <Settings>/<Sys settings>
The a to d indicators form the statusbar and are
shown on every page. If the speed is already being
English – 17
c
31%
d
e
,5
f
a)
1 270 U20 XBK | (11.03.2024)