Bosch Kiox BUI330 Notice D'utilisation D'origine page 16

English – 14
– TOUR/TOUR+:
TOUR: Steady assistance, long range for touring
TOUR+: Dynamic assistance for normal riding and
biking sports (only in conjunction with eMTB)
– SPORT/eMTB:
SPORT: Powerful assistance, for mountain biking
and cycling in urban traffic
eMTB: Optimal assistance whatever the terrain,
rapid acceleration when starting from a standstill,
improved dynamics and top performance (eMTB
only available in combination with the Performance
Line [BDU365] and Performance Line CX
[BDU250P, BDU450, BDU480] drive units. A soft-
ware update may be required.)
– TURBO: Maximum assistance even at a high ca-
dence, for biking sports
To increase the assistance, press the + (12) button
on the operating unit repeatedly until the desired rid-
ing mode appears on the display. To decrease the as-
sistance, press the – (11) button.
The requested drive power appears on the dis-
play i (see "Start page", page English – 17). The
maximum drive power depends on the selected riding
mode.
If the on-board computer is removed from the holder
(5) and reinserted, the on-board computer always
starts again in the riding mode OFF.
Switching the push assistance on/off
The push assistance aids you when pushing your
eBike. The speed of this function depends on the se-
lected gear and can reach a maximum of 3.7 mph.
The push assistance function must only be used
u
when pushing the eBike. There is a risk of injury if
the wheels of the eBike are not in contact with the
ground while using the push assistance.
To activate the push assistance, briefly press the
WALK button on your on-board computer. After acti-
vation, press the + button within 10 s and keep it
pressed. The eBike drive is switched on.
Note: The walk assistance cannot be activated with
the riding mode set to OFF.
1 270 U20 XBK | (11.03.2024)
The push assistance is switched off as soon as one of
the following occurs:
– You release the + button (12);
– the wheels of the eBike are locked (e.g. by applying
the brakes or hitting an obstacle);
– the speed exceeds 3.7 mph.
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.
Do not activate push assistance function while
u
riding on the bike. Only use push assitance func-
tion when pushing the eBike.
Switching bicycle lights on/off
On the model in which the lighting is powered by the
eBike system, the front and rear lights can be
switched on and off at the same time via the on-board
computer using the bike lights button (3).
Before starting each journey, check that your bike
lights are working correctly.
If the lighting is switched on, the bike light indicator c
(see "Start page", page English – 17) lights up in the
status bar of the display.
Switching the bike lights on and off has no effect on
the backlighting of the display.
Creating a user account
In order to be able to use all the functions of the on-
board computer, you must register online.
You can create a user account via the eBike Connect
app or by going to www.ebike-connect.com. Enter
the details required for registration. The eBike Con-
nect app can be downloaded free of charge from the
Apple App Store (for Apple iPhones) or from the
Google Play Store (for Android devices).
With the user account, you can analyze your ride
data, plan routes and transfer these routes to the on-
board computer.
Bosch eBike Systems