Bosch Kiox BUI330 Notice D'utilisation D'origine page 18

English – 16
Charging requires the on-board computer to be
mounted and a sufficiently charged eBike battery to
be inserted in the eBike.
Open the protective cap (17) for the USB port on the
on-board computer. Use the Micro A–Micro B USB
charging cable (available from your Bosch eBike
dealer) to connect the USB port of the external device
to the USB port (6) of the on-board computer.
Once the electrical load has been disconnected, the
USB port must be carefully resealed with the protec-
tive cap (17).
A USB connection is not a watertight plug con-
u
nection. When cycling in wet conditions, ensure
no external devices are connected and that the
USB port is fully covered by the protective
cap (17).
Attention: Any electrical devices connected can re-
duce the range of the eBike.
1 270 U20 XBK | (11.03.2024) Bosch eBike Systems