Press and hold the
o
pack for 3 seconds to activate the Bluetooth
function.
Enable the Bluetooth function on your smart
o
phone.
Open the Lidl Home app.
o
There are 3 different options to connect the
o
product to the Lidl Home app:
Connecting the product for the first time
to the Lidl Home app:
{Add
device}
1. Select
Lidl Home app scans the area for available
products. The Lidl Home app indicates if
available products have been found.
NOTE
If the Lidl Home app cannot find
u
available products, continue with "No
automatic suggestion of available
products".
{Go to
add}
2. Tap
products in the list.
3. Tap
to select the battery pack.
NOTE
Select only one product at a time. If there
u
are check marks for other products:
Tap
to clear the marks.
+
4. Tap
.
{Done}
5. Tap
to confirm the connection. The
battery pack is listed in the
be selected.
6. Select the battery pack. The information of
the cordless drill PABSP 20 Li C3 (2201) can
{Device
be found in
46 GB/IE
button on the battery
on the
tab. The
to show the available
tab and can
info}.
NOTE
{Smart device not
If
u
{Device
displayed under
Check if the battery pack is inserted into
the product.
Check if the connection status LED
up continuously.
NOTE
If the connection status LED does not light
u
up continuously:
Connect the product to the battery pack.
Press the on/off switch
The connection status LED blinks for a few
seconds and lights up continuously. The
product is shown in
The products were already connected to
the Lidl Home app:
+
tab. The Lidl Home
Tap
on the
o
app scans the area for available products.
The Lidl Home app indicates if available
products have been found.
NOTE
If the Lidl Home app cannot find
u
available products, continue with "No
automatic suggestion of available
products".
No automatic suggestion of available
products:
+
1. Tap
on the
tab.
{Other}
2. Select
in the bar on the left.
3. Select {Other-2}. The display flashes rapidly.
The Lidl Home app scans the area for
available products.
+
4. Tap
to select the battery pack and to add
it to the app.
5. Tap {Next}.
connected}
is
info}:
lights
[
]
for 5 seconds.
6 ]
[
{Device
info}.