Parkside PAP 20 B1 Instructions D'utilisation Et Consignes De Sécurité page 31

the battery operated tool is ready for use.
To insert the rechargeable battery 2 ,
o
place it on the guide track and push it into
the charger 6 . The rechargeable battery
audibly snaps into place.
To remove the rechargeable battery from
o
the charger, press the rechargeable battery
release button 1 and pull out the recharge-
able battery.
˜ Cleaning
CAUTION! RISK OF INJURY AND
m
DAMAGE!
Never use flammable or combustible
solvents around battery packs, charger, or
tools.
Clean out dust and debris from the vents
o
and electrical contacts of the charger 6
and the rechargeable battery 2 using a
soft brush.
˜ Maintenance and storage
Only store the rechargeable battery 2
o
partially charged. The rechargeable battery
should be charged to 40 to 60 % (red and
orange LED of the charging level LEDs 3
light up) before storing for extended periods.
Check the rechargeable battery charge
o
32 GB/IE/NI