Télécharger Imprimer la page

FLORABEST FBME 575 A1 Traduction Du Mode D'emploi Original page 30

Masquer les pouces Voir aussi pour FBME 575 A1:

Publicité

Les langues disponibles

Les langues disponibles

1. Pull the height adjustment handle (25)
free of the notches for height adjustment
(47).
2. Move the height adjustment handle (25)
forward or backward to the desired
position.
3. Let the height adjustment handle (25)
snap back into the notches for height
adjustment (47).
The recommended cutting height is around
30 – 45 mm for an ornamental lawn and
around 40 – 65 mm for a utility lawn.
Select a greater cutting height for
the first cut of the season.
Emptying the grass
collection box (Fig. A, F)
Grass fill level indicator
The grass fill level indicator (33) attached to
the top of the grass collection box (29)
shows when the grass collection box is full.
Grass fill level indicator (33) open:
Grass collection box has free
space.
Grass fill level indicator (33)
closed:
Grass collection box full.
1. Stop the engine and wait until the blade
is stationary.
2. Lift the rear deflector (28) and remove
the grass collection box (29).
3. Carry the box to your grass disposal site
and upend it. For easy emptying, hold
the box at its upper handle (32) and
lower handle (30).
Cleaning and
maintenance
Have any repair and
maintenance work
not described in these
instructions carried out
by a specialist workshop.
Use only original
replacement parts. Risk of
accidents!
Carry out maintenance and
cleaning work strictly with
the engine switched off and
spark plug connectors
removed. Risk of injury!
Allow the equipment to cool
before any maintenance and
cleaning work. Elements of
the engine are hot. Risk of
burning!
Wear gloves when handling the
blade.
For cleaning and maintenance
work, also observe the Briggs &
Stratton instruction manual
supplied.
We recommend contacting an
authorised Briggs & Stratton dealer
for maintenance work on the
engine.
GB
IE
NI
30

Publicité

loading