Publicité
COUNTER MODES
The counter can be set to one of three following modes: normal
tape counter, time counter for displaying the elapsed recording or
playback time, or remaining time counter for displaying the re-
maining tape time.
COUNTER MODE button
By pressing this button repeatedly, the following three modes are
called in succession:
Tape counter
PARLE
Remaining time
counter
Time counter
D
GF reman
30 p g ™
TAPE COUNTER
The counter reading will change as the tape runs. By taking a note
of the counter readings and the contents during recording or play-
back, desired selections or unrecorded portions on the tape can
be easily located at a later date.
TIME COUNTER
@
Displays the elapsed time during recording or playback. The
time counter is automatically activated when the unit is set to
recording or playback.
@
The time counter displays only the recording or playback dura-
tion. It disappears when fast forward, rewind or music search
is performed, and is replaced by the tape counter. When
re-
cording or playback is restarted, the time counter
appears
again.
NOTE:
46-minute and 80-minute tapes can be purchased with two dif-
ferent hub sizes: standard hub and large hub. Tapes with large
hubs are marked with an "L", such as C46L and C80L.
Tapes with a hub diameter of 27 mm are referred to as large
hub tapes.
Please note that with hub diameters of more than 27 mm
the
tape remaining time indication will not be corred.
3.
REMAINING TIME COUNTER
Displays the remaining time of the tape during recording or play-
back.
1. Set to remaining time counter mode by pressing the
COUNTER
MODE
button.
2. Press the COUNTER
RESET/TAPE CAPA button.
The counter display changes to the tape capacity display. By
pressing the selector
repeatedly, the following
settings are
called in sequence.
rer
LOL
(60-minute tape)
N
mee
L
E nic?
LA
JL
OL
Ba
tape
n Eey tape
with large hubs}
with large hubs)
Ne
7
Cr
E
=
1
(90-minute tape)
Set the tape capacity according to the length of the tape in use.
Set to playback or recording mode.
Five to seven seconds after the tape starts running, the remain-
ing time for the tape is displayed.
NOTES:
The remaining time can be indicated only for the four types of
cassettes that can be selected with the COUNTER RESET/TAPE
CAPA button. When using tapes of different lengths, set the se-
lector as follows to obtain a close enough estimation of the re-
maining time.
Up to C-60, standard hub tapes...
C-60 position
Up to C-60, large hub tape ......ssccsseeseterseeee C-46L position
Up to C-90, standard hub tapes.
.. C-90 position
Up to C-90, large hub tapes...
C-80L position
For commonly sold pre-recorded tapes the remaining time may
not be displayed correctly.
The actual remaining time may differ from the remaining time
indication depending on the tape used. Also, since most tapes
are slightly longer than the playing time indicated on the label,
the remaining time indication "0000" may be reached before
the actual end of the tape.
Once the remaining counter has been displayed, even if the
counter mode is changed, the remaining time can be checked
again by simply selecting the remaining counter mode.
Standard hub
Large hub
19
<RRE1078>
En
Publicité
