Télécharger Imprimer la page
Pioneer CT-95 Mode D'emploi
Masquer les pouces Voir aussi pour CT-95:

Publicité

Liens rapides

W@ PIONEER
The Art of Entertainment
CT-95
(U.S. and Canadian models only)
{Modéles pour tes Etats-Unis et le Canada seulement)
STEREO CASSETTE DECK
PLATINE CASSETTE STEREO
WARNING:
to prevent FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
{For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this seria! number
on your enclosed warranty card
and keep it in 8 secure area for future reference.
[For Canadian model]
CAUTION:
to prevent ELectRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RE-
CEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour prevenirn Les cHocs ELEc-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DE-
COUVERT.
®
For the demo function, refer to back cover of these operating
instructions.
@
Pour la fonction de démonstration, se reporter 4 la couverture
arriére de ce mode d'empioi.
English
Francais
Liseennentnrtreaenssnaaeeastante
LINE VOLTAGE SELECTOR SWITCH
|
| i
Only multivoltage modeis are provided with this switch. U.S.,
Canadian, European, U,K., and Australian models are not pro-
vided with this switch.
Mains
voltages
in Saudi
Arabia
are 127 V and 220 V only.
Never use this model with a 110 V setting in Saudi Arabia.
The line voltage selector switch is on the rear panel. Before your
model is shipped from the factory, this switch is set to the power
requirements of the destination. Check that it is set properly be-
fore plugging the power cord into the AC outiet. If the voltage is
not properly set or if you move to an area where the voltage re-
quirements differ, adjust the selector switch as follows.
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage selector,
and adjust so that the tip of the arrow points to the voltage
value of your area.
Medium-size
screwdriver

Publicité

loading

Ce manuel est également adapté pour:

Ct-43Ct-s920sCt-s820sCt-s620