ULTIMATE SPEED USML 3.7 B2 Mode D'emploi page 23

Do not insert fingers or sharp
objects into the contacts of the
type 2 plug .
If the product is damaged,
remove the mains plug
immediately from the mains
socket . Remove the type 2 plug
from the vehicle . A damaged
product can lead to death or
serious injuries . Before each use,
check the product for damage
(e .g . cracks) . Do not use the
product if it is damaged .
m WARNING! Risk of fire
and explosion!
Never use the product
–near flammable liquids;
–near flammable gases;
–near potentially explosives
areas (e .g . paint shops)
The radio waves emitted can
cause explosions and fire .
Devices building up heat must
be separated from the product
to avoid accidental activation .
Only use the product in
locations with an ambient
temperature between –25 °C
and +45 °C .
Only store the product in
locations with an ambient
temperature between –25 °C
and +45 °C .
Only use the product up to a
height of 2,000 m above sea
level .
m CAUTION! Risk of burns!
The product may heat up during
operation . Do not touch the hot
surfaces .
m NOTICE! Risk of property
damage!
Do not step on or drive over the
product .
Do not jam or kink the product .
Before setup or first use, check
the product for any damage .
Do not use the product unless in
perfect working order .
Do not attempt to repair the
product yourself . In case of
malfunction, repairs are to
be conducted by qualified
personnel only .
Never use a damaged product .
Disconnect the product from
the mains socket and contact
our customer service if it is
damaged .
The electrical system and the
socket of your vehicle has to be
checked by qualified personnel
before use .
GB/IE 23