Struers Accutom-50 Manuel D'instructions page 7

Checking the Contents of
Packing
Placing Accutom-50
Getting Acquainted with
Accutom-50
Accutom-50
Instruction Manual
1. Getting Started
In the packing box you should find the following parts:
1 Accutom-50
2 Mains cables
1 Specimen Holder with parallel vice
1 Flange for cut-off wheels (42 mm dia.)
1 Stop pin
1 Spanner, 17mm
1 Small grate
1 Large grate
1 Debris collecting tray
1 Tube for vacuum connection
1 Cooling tube for use with cup-wheels
1 Allen key, 2 mm
1 Allen key, 2.5 mm
1 Allen key, 3 mm
1 Allen key, 4 mm
1 Allen key 5 mm
2 Screws M4x20
2 Screws M4x35
1 Set of Instruction Manuals
Accutom-50 should be placed on a stable and plane (tolerance
±1 mm) table. The table must be able to carry a weight of min. 50 kg.
Take a moment to familiarise yourself with the location and names of
the Accutom-50 components.
A Front panel/Front panel control(s)
B Main switch
C Recirculation Cooling Unit
D Cut-off wheel/Cup wheel
E Specimen holder head
F Screw to vacuum connection
3