Selecting between
Cutting and Grinding
16
Accutom-50
Instruction Manual
To select between cutting and grinding you must be in the Main
Menu. As Accutom-50 always starts up in the same state as when
the voltage was switched of last time, it might be necessary to go
back to the Main Menu.
To go back to the Main Menu:
Esc Press Esc, until the MAIN MENU display appears.
(A long beep can be heard).
CUTTING METHODS
GRINDING METHODS
MANUAL FUNCTIONS
CONFIGURATION
Press MENU UP/DOWN
CUTTING METHODS and GRINDING METHODS.
Press ENTER
If you selected CUTTING METHODS, the
screen will appear as follows.
MAIN MENU
to select between
, to accept the selection.