Struers Accutom-50 Manuel D'instructions page 16

Reading the Display
The "heavy" arrows on the
display indicate the
direction in which the
sample holder is moved,
for example:
X-POSITIONS 
Y-POSITIONS 
12
Accutom-50
Instruction Manual
The display can show various kinds of information, for example about
the cutting or grinding method or about the sample position. A screen
for a cutting or grinding method could look as the following example:
Cutting Method:
Wheel : B0D15
Feed :0.100 mm/s
Rotation: OFF
Water :
F1:MULTI. CUT


Pressing one of the X-axis positioning keys will change the
screen to the following:




Absolute Position:
Relative Position:
F1:RESET F2:ADD
 F2:ADD is only available in cutting methods.

 Pressing one of the Y-axis positioning keys will change the

screen to the following:

Absolute Position:
Relative Position:
Stop Position:
F1:RESET F2:SET STOP F3:MOVE TO REL.ZERO

Esc Press Esc, to return to the cutting or
grinding method screen.
1. EMPTY METHOD
Speed : 2700 rpm
Force :
ON
X-POSITIONS 
15.255 mm
5.000 mm
F3:MOVE TO REL. ZERO
Y-POSITIONS 
55.7 mm
0.0 mm
20.0 mm

MEDIUM