Struers Accutom-50 Manuel D'instructions page 50

Method Options
Saving a Method
46
Accutom-50
Instruction Manual
While working with a specific method, you can save the changes you
have made in the database.

As soon as a parameter is changed in a cutting or grinding
method, F4:SAVE will be shown on the bottom line of the
display.
Cutting Method:
Wheel : B0D15
Feed :0.200 mm/s
Rotation: OFF
Water :
F1:MULTI. CUT


Press F4:SAVE to save the changes after
F4
all necessary parameters have been altered.

Save changes in method
1. EMPTY METHOD
ENTER: YES


Press ENTER
method.
Unless you have already named the method,

the name will automatically change from
EMPTY METHOD to UNNAMED METHOD.
This will always show that at least one
parameter has been changed compared to a
default method.
When saving changes, the original method will be overwritten.
If you want to keep the original method, you should make a copy of the
method with a new name, thus making the changes in a copy rather than
changing the original method. See Copying a Method.
1. EMPTY METHOD
Speed : 2700 rpm
Force :
ON
F4:SAVE
SAVE METHOD
?
ESC: NO

to save the modified
Important

MEDIUM