Publicité
Les langues disponibles
Les langues disponibles
Dressing
Dressing of Cut-off Wheels
Accutom-50
Instruction Manual
Diamond and CBN cut-off wheels and cup wheels may have to be
dressed to open up the wheel again and achieve maximum effect
after cutting or grinding of ductile materials. This can be done using
the following routine:
Mount the cut-off wheel or cup wheel to be dressed.
Clamp the dressing stick in the sample holder and position it
correctly.
−
The dressing stick has to be in front of the wheel so that the
wheel is cutting slices of the dressing stick.
From the MANUAL FUNCTIONS MENU Press MENU
UP/DOWN
DRESSING OF CUT-OFF WHEEL.
SAMPLE ROTATION
RECIRCULATION PUMP
DRESSING OF CUT-OFF WHEEL
DRESSING OF CUP WHEEL
Press ENTER
option.
to select
MANUAL FUNCTIONS MENU
to activate the dressing
43
Publicité
