Publicité
GB
General technical approval/general
design approval
No. Z-40.21-565 of 9 November 2023
Rotational-moulded container combination
made from polyethylene (PE) – type: CUBE
tank 5000 l
1
Packaging
It is not necessary to package the Container for transportation or for (temporary) storage,
provided the requirements set out in Section 2 are met. All nozzle openings must be closed
by screwing on the caps.
2
Transportation and
2.1
General
The Container may only be transported by companies with: professional experience;
appropriate equipment, facilities and means of transportation; and adequately trained
personnel.
2.2
Preparation for transportation
(1) The Container must be prepared for transportation in such a way that it cannot be
damaged during loading, transportation or unloading.
(2) The loading area of the vehicle used for transportation must be designed in such a way
that the Container cannot be damaged by point impacts or loads.
2.3
Loading and unloading
(1) When hoisting, moving and lowering the Container, impact-type loads must be avoided.
(2) If a forklift truck is used, the Container must be secured while it is transported on the forklift
truck.
(3) Nozzles and other protruding parts of the Container must not be used for the purpose of
securing or hoisting the Container. It is not permitted to drag the Container along the ground.
Shipping
2.4
(1) The Container must be secured to prevent movement during shipping.
(2) The method used to secure the Container must not result in damage.
Storage
2.5
(1) Where the Container is being temporarily stored in an outdoor area, it must be protected
against damage and the effects of storms. The inner container must not be exposed to outdoor
weathering for more than six months.
(2) It is essential to ensure that no rainwater is able to penetrate between the inner container
and the collection container.
Damage
2.6
Where damage has occurred during transportation or temporary storage, the Container must
be handled in accordance with the findings of a competent expert on synthetic materials
the assistance of the applicant where appropriate.
1
Experts from certification and inspection bodies and other experts determined by the Deutsches Institut für
Bautechnik upon request
Z96891.23
50
Annex 3
, with
1
1.40.21-64/23
Publicité
