Publicité
GB
Important documents for the operator!
Please keep safe for future reference!
(Documents must be presented during inspections
of filling stations.)
1. General
2. Installation requirements
3. Transport
4. Installing the tank
5. Filling and delivery systems
6. Operation
7. Overfill protection devices
8. Warranty
9. Acceptance test certificate
10. EC Declaration of Conformity
11. General Technical Approval
These instructions apply to CEMO – CUBE tanks
in accordance with General Technical Approval/
General Design Certification Z-40.21-565
If this tank is to be used in accordance with the
standard EN 13341, the "Ü" mark on the type plate
must be covered by the enclosed sticker with the
CE mark.
1. General
1.1
Documents to be complied with
•
Approval decision for CUBE-Tank (operator's
extract)
•
User manuals for delivery systems (e.g. pumps
and counters) of accessory manufacturers
User manual for overfill protection device (limit
•
indicator)
•
User manual for the leak sensor
The provisions of water law, industrial law and
•
building law must also be observed.
1.2
Application
The CUBE Tank 5000 I is a factory-produced
container consisting of a roughly vertical cylindrical
internal tank made in a rotation-moulding process,
and a surrounding outer container, which serves
as a collection tray and together form a container
combination made from polyethylene (LLD-PE).
The CUBE Tank 5000 I is intended for the non-
pressurised storage of:
28
•
Diesel fuel
•
Biodiesel
•
Lubricants
Pure urea solution 32.5% (e.g. AdBlue
•
other stored media in accordance with General
Technical Approval/General Design Certification
28
Z-40.21-565.
28
The permissible operating temperature is 40 °C.
The CUBE Tank 5000 I is factory-fitted with a filling
28
and ventilating connection, as well as a delivery
29
system (pump, delivery hose and delivery valve), a
level indicator, and a leak detector.
29
30
2. Installation requirements
30
The installation requirements for the relevant
30
media can be found in the regulations under water
31
law, industrial law and building law. The containers
32
must only be installed in rooms within buildings
and in outdoor areas, but must not be used in
33
potentially explosive atmospheres in Zone 0 or 1.
When used in areas prone to flooding, the contain-
ers must be positioned in such a way that the
floodwater cannot reach them.
Prior to commissioning, the operator must afÏx a
sign to the container stating the name of the stored
fluid, its density and concentration.
3. Transport
Important!
CUBE tanks must only be moved or
transported while empty!
In order to prevent mechanical damage, CUBE
tanks are supplied on a transport pallet and packed
in a protective film. To prevent damage and to
retain the right to claim under guarantee, the fol-
lowing must be observed at all times:
•
Transport and store only in original packaging
•
Do not drop or throw the tank
•
Do not place tank against edges or sharp
objects
•
Do not remove transport packaging until tank is
placed at installation site
Should damage nevertheless occur, please
•
report this to our customer service team!
®
) and
Publicité
