Microphone Mute; Flash (R-Key) / Transfer A Call; Pre-Dial; Pause - TIPTEL 272 Manuel D'utilisation

Microphone mute

In talk mode, press
call will be ended.
To release the mute function press

Flash (R-key) / Transfer a call

This function is mainly for PBX systems. If you have call waiting service from your
network provider, it will also work for call waiting service.
a. Press
b. Press
Note: Please, check flash timing in case of problems. PABX setting usually is 100
ms while network providers may use 100 ms or 300 ms. Please, ask your network
e provider or PBX installer (in case this device is used behind a PABX) for the
appropriate setting.
n
g

Pre-dial

In on-hook status, type in the phone number and then pick up the handset. The
number will be dialled automatically.

Pause

Press

Redial / Auto redial

In on-hook status, press
Pick up the handset or press
Auto Redial
In on-hook status, press AUTO /
continuously (up to 15 times) until the phone is answered.
and the call will be muted. If you hang up the handset the
for call waiting service from your network provider.
to transfer a call to another extension (within a PABX).
for a break off of 1.2/2.4/3.6 seconds (depending on setting).
to review the last 16 dialled numbers.
Operation
again. Microphone will be switched on.
to dial the reviewed number.
to auto redial the last dialled number
14