TIPTEL 272 Manuel D'utilisation page 102

1. Connect one end of the coil cord to the jack of the handset, connect the other
end to the jack of the base unit.
2. Plug one end of the flat cable to the line jack (1) of this phone, plug the other
end to the telephone wall socket.
Notes:
This phone is powered by the telephone line. Batteries are not needed. Alarm clock
only functions if the phone is connected to a telephone line continuously.
If the phone is disconnected from the telephone line for several minutes, date and
time are restored to factory default settings, caller-ID list and redial list are deleted.
The Message Waiting Switch is good for operating the phone behind a PABX.
Switch position has to be SR for operation on a public line.
e
n
g
Getting started
10