WARNING! Electric shock! There is a risk of
an injury caused by electric shock!
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Check the voltage. Technical data given on the
type label must correspond with electric net-
work voltage.
Insert the plug of the electrical cable in a socket
of suitable shape, voltage and frequency com-
plying with current regulations.
Use extension cables with a maximum length
of 5 meters and with a cable cross-section of
not less than 1.5 mm2. Use of extension cables
of different length and cross-section and also
of adapters and multiple sockets should be
avoided.
Check the cable and/or socket for damages
before the appliance putting into operation.
To avoid danger, a damaged mains supply pipe
must be replaced by the manufacturer. Do not
under any circumstances attempt any repair
yourself.
Never let the compressor come into contact
with water or other liquids and never direct the
jet of liquids sprayed by tools connected to the
compressor towards the compressor: as the
appliance is live, this could cause electrocution
or short-circuits.
Never use the appliance with bare feet or wet
hands or feet.
Never yank the power cable to disconnect the
plug from the power outlet or to move the
compressor.
Warning: the compressor may restart when
power is restored following a blackout.
Compressed air is a potentially dangerous
form of energy; always take great care when
using the compressor and its accessories.
This device is not intended for use by persons
(including children) with limited physical,
sensory or mental capabilities or without the
necessary lack experience or knowledge unless
they are supervised by a person who is respon-
sible for their safety or were instructed by that
person in how to use the device.
Children should be supervised to ensure that
they do not play with the device. Always keep
children and unauthorised persons out of reach
of the appliance.
Never use the compressor without being
supervised.
Never direct the jet of air towards persons,
animals or your body.
Never keep the air flow in body holes as that
could lead to fatal injuries!
Keep the work area free.
When operating, the compressor must be
placed on a stable surface.
Caution! The compressor may only be used
with appropriate wheels and rubber bumps.
Safety goggles should be worn when using the
compressor in order to protect the eyes against
any foreign bodies lifted by the jet of air.
If possible, when using air-powered accessories,
wear safety clothing.
Always maintain a safety distance of at least 4
meters between the compressor and the work
area.
Caution! The pneumatic hose may lash you
when the quick-acting coupling is opened! The
pneumatic hose should be held by hand.
Always use the handle to move the compressor.
When using compressed air, you must know
and comply with the safety precautions to be
adopted for each type of application (inflation,
airpowered tools, painting, washing with water-
based detergents only, clinching, etc.).
When using compressed air, you must know
and comply with the safety precautions to be
adopted for each type of application (inflation,
airpowered tools, painting, washing with water-
based detergents only, clinching, etc.).
Caution! Never switch the compressor on or off
using the plug. Pressure switch to be pressed at
all times.
Do not leave the compressor on over night as it
could become a source of danger.
At the end of your working day, switch the
appliance off, release the air jet and unplug the
compressor.
Warning: if the water that condenses is not
drained, it may corrode the receiver, reducing
its capacity and impairing safety.
As it is a contaminating product, condensate
must be DISPOSED of in accordance with laws
on protection of the environment and current
ENGLISH
27