Wahl 1591 Q Mode D'emploi page 12

E N G L I S H
f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently.
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade set
should be replaced.
Changing the blade set
1. Slide the blade set off the housing in the direction of the arrow
de
(Fig. 6ⓐ). Remove the blade set.
2. Replace the blade set by hooking it into the housing and press-
en
ing it down until it clicks into position (Fig. 6ⓑ).
fr
it
Problem solving
es
Blade set is cutting badly or pulling hair out.
pt
Cause: Blade set is dirty or worn out.
nl
f Clean and oil the blade set. If this does not resolve the prob-
lem, replace the blade set.
da
Skin injury
sv
Cause: Too much pressure on the skin.
no
f Reduce pressure when cutting close to skin.
fi
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use and
tr
replace the blade set if necessary.
pl
Battery operating time is too short
cs
Cause: A blade set that is very dirty and has not been oiled can
reduce the available battery operating time substantially!
sk
f Carefully clean and oil the blade set. If the blade set is clean
hr
and oiled and the battery operating time is still far too short, it
is likely that the batteries are nearing the end of their life.
hu
Charging indicator does not light up
sl
Cause: The appliance must be switched off for charging.
ro
f Check whether the appliance is switched off.
bg
Cause: Appliance has not been correctly placed on the charging
stand.
ru
f Ensure that the appliance has been correctly placed on the
charging stand.
uk
et
Cause: The charging stand is not compatible with the appliance.
f Only use the charger that is included in the scope of sup-
lv
ply. Refer to the nameplate on the hand-held appliance and
charger.
lt
el
12
ar
Cause: Charging contacts are dirty.
f Clean the charging contacts on the appliance and on the
charging stand.
Cause: Defective power supply.
f Make sure that there is a faultless contact between the plug-in
transformer and the socket.
f Check the mains cable for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to repair
the appliance yourself!
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of the
appliance.
Information on the disposal of electrical and electronic appli-
ances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equipment
Directive 2012/19/EC (WEEE). In accordance with this,
the appliance can no longer be disposed of with the
local or domestic waste.The appliance will be accepted
free of charge by local collection points or recycling cen-
tres. The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.