Texas Equipment RMX 600 Manuel D'utilisation page 71

5. Wait for
connection
Manuel connection (without using QR code)
1. Stand next to the robot while it is turned on.
2. Tap the circle with (+) in the middle of the screen.
3. Then press the "Manually pairing Bluetooth devices" button at the bottom of the screen
4. A list of Bluetooth devices will appear. Select "Mower_XXXXXXXX"
5. Serial number now appears. Enter the PIN code for the robot. By default, the code is
0000, but if you have manually selected another PIN code via the robot's display, the
new one must be used.
6. Select Wi-Fi network (only 2.4 GHz) and enter password for the network.
7. The robot is now added and appears in the overview "Devices" and a Wi-Fi icon will
light up on the robot's display.
8. You can finally name the robot (can also be changed under "Settings")
Control robot in a second mobile phone
If you want another mobile phone to also be able to control the robot, you can do this by
sharing the device:
1. First, install the robot App on the second mobile phone.
2. Choose the overview (Devices) on the mobile phone where the robot is connected to
3. Touch and hold the robot's name and swipe left
4. Click on "Sharing Devices". After that, a QR code will appear.
5. Choose the round circle with (+) on the second mobile phone and scan the barcode,
after which the robot will be added here as well.
The original phone (the owner) can stop sharing the robot with others at any time
without their approval. In this case, select "Stop sharing" and confirm.
6. Enter 0000 in
password
71
7. Select network
and key password
8. The robot has
been added