Stiebel Eltron SH 50 A 2,0 230 Utilisation Et Installation page 20

INSTALLATION
Preparations
Universal wall mounting
With the universal wall mounting you can use the existing mount-
ing bracket from an old appliance or compensate for unevenness
in the wall.
1 Existing mounting bracket
2 Universal wall mounting
Universal wall mounting, part number 154828
Ceiling installation
With the combination of ceiling installation and universal wall
mounting you can attach the appliance to the ceiling.
1 Ceiling installation
2 Universal wall mounting
Ceiling installation, part number 154827
Universal wall mounting, part number 154828
20 | SH A
9.
Installation site
The appliance is designed for installation on a solid wall. Ensure
the wall offers adequate load bearing capacity.
Always install the appliance vertically in a room free from the risk
of frost and near the draw-off point.
Fitting the wall mounting bracket
You can also attach the appliance to existing mounting brackets or
to the ceiling (see chapter "Appliance description / Accessories").
1
f Otherwise, transfer the dimensions for the holes to be drilled
f Drill the holes and secure the wall mounting bracket with
2
You can compensate for unevenness in the wall with the spacers
provided.
Appliances with a nominal capacity of 120 l or 150 l require 2 wall
mounting brackets.
1
1 Lower spacer
2 Upper spacer
2
Preparing the connecting cables
Preparations
on the wall (see chapter "Specification / Dimensions and
connections").
screws and rawl plugs. Select fixing materials in accordance
with the wall construction/condition.
2
1
120
270
www.stiebel-eltron.com