BLUEFIN Fitness HX7 8TG Pro Manuel D'instructions page 6

ASSEMBLY
INSTRUCTIONS
We recommend 2 people assist in assembling this unit. Place
all parts in a cleared area and remove the packing materials.
Do not dispose of the packing materials until assembly is
completed. Before you start installation inspect and prepare
all parts and screws featured in this manual.
Assembly Parts:
1 x Allen Wrench
2 x Crosshead Screws
7 x Flat Washers
15 x Hex Screws
1 x Power Connection Cable
1 x Part A (Short Central Support Tube)
1 x Part B (Long Central Support Tube)
1 x Part C (Base Plate)
1 x Part D (Control Console)
2 x Part E (Bottom Support Poles)
2 x Part F (Top Support Poles)
1 x Part G (Bottle Holder)