CONTROLS
CAL/BMI Calculator:
1
To calculate your BMI, please ensure the power is on and timer is off.
2
Check that the "Time" field shows "F01".
3
In BMI field select "1" for male or use "SPEED +" or "SPEED –" to change to
"2" for female. Press the "TIME" key to confirm.
4
The system will automatically progress to the AGE setting "F02" ,
press"SPEED +" or "SPEED –" to change user age. Press the "TIME" key to
confirm.
5
The HEIGHT setting will come up now in "F03" counted by METERS and cm.
Users can select their height using "SPEED+" or "SPEED –" to change from
0.10 to 2.50. (Default is 1.70). Press the "TIME" key to confirm.
6
The WEIGHT setting at "F04" cycles through next. This is measured in kg.
Users can select "SPEED+" or "SPEED –" to change from 010 to 150. The
default weight is 70 kg. Press the "TIME" key to confirm.
7
Put both hands on the metallic hand sensors and then the BMI will display.
NB/ Moisten the hands slightly if contact is not registered.