9.4 Protocol/ Safety and audit protocol
Log information from the camera can be displayed here. An SD card must be installed in the camera for log
information to be saved.
9.5 IP address filter
Activate IP address filter
Ticking the checkbox activates the filter function.
IP address filter type
Allowed: The IP addresses defined below are accepted for access to the camera.
Forbidden: The IP addresses defined below are blocked. An IP is entered using the format xxx.xxx.xxx.xxx.
9.6 MAC address filter
Allow or block certain MAC addresses of clients.
9.7 Login administration
Blocking for illegal registration
After 3 to 20 incorrect login attempts, access to the device can be blocked for a certain period of time (1 to
120 min. block).
Timeout for non-operation
The user can be logged out after 1 to 60 minutes of inactivity.
9.8 Licence management
Configuration page for certificate management. This page is used to manage the certificates that can later be
used in certain settings pages.
9.9 TLS
Settings for the TLS version and the certificate management for TLS.
143