Simons Voss Technologies SmartHandle LockNode Guide Abrégé page 25

25 / 88 | EN
This adapter cable connects the LockNode on the outside
of the fitting with the electronics on the inside of the fitting.
IMPORTANT
Malfunction due to moisture
The adapter cable is not suitable for use in humid environ-
ments.
Do not use the adapter cable for the WP versions of the

SmartHandles mentioned.
4. Technical specifications
Dimensions
Power supply
Operating current
Sensitivity
4. Technical specifications
45 mm × 17 mm × 12 mm
3 V (batteries of
DC
SmartHandles)
Standby (without data
transmission): approx. 6 µA
Active (with data transmis-
sion): approx. 30 mA
-95 dBm