Simons Voss Technologies SmartHandle LockNode Guide Abrégé page 22

2. Important
sioning instructions. Pass these instructions and any main-
tenance instructions to the user.
2. Important
IMPORTANT
Malfunctions due to damaged connecting cable
A damaged connecting cable may no longer be able to
transmit the signal correctly. Functional errors may occur.
1. Do not damage the connecting cable.
2. If the covers are difficult to put on, check the position of
the LockNode.
3. Installation
SmartHandle cover and inlay removed (see Quick Start
ü
Guide or SmartHandle manual).
Grounding completed (e.g. on radiator)
ü
1. Place the LockNode on the plate of the SmartHandle
subassembly as shown.
1
2. Push the LockNode as far as it will go in the direction of
22 / 88 | EN