Simons Voss Technologies SmartHandle LockNode Guide Abrégé page 23

23 / 88 | EN
the arrow.
2
LockNode lies flat on the subassembly.
9
3. Connect the connecting cable of the LockNode with the
connecting cable of the SmartHandle.
3
SmartHandle beeps and flashes red 4 times.
9
4. Store excess connection cable in the SmartHandle sub-
assembly.
IMPORTANT
Malfunction due to weather influences
Even in the WP version, the plug connections are not splash-
proof. If moisture reaches the contacts, data transmission
may be disturbed.
Store the cable connectors in the inside area of the

SmartHandle.
5. Replace the cover and inlay of the SmartHandle (see
Quick Start Guide or SmartHandle Manual).
The gold-coloured metal clip on the LockNode connects the
LockNode mechanically and electrically (positive pole) with
the SmartHandle. When you have mounted the cover and
3. Installation