Publicité
Les langues disponibles
Les langues disponibles
The time of day is displayed in hours and minutes.
Always set the clock immediately after installation, the clock displays the time 12:00
operations except when there is the timer or any timed cooking operations running. The oven is preset to a 12-hour clock and
indicates
and
.
AM
PM
To Set the Time of Day
1. Touch
until the display shows the "SET TIME" writing.
TIME
+
2. Touch
or
-
to set the desired time, the hours will begin
flashing: continue until the correct hour value and
indication is selected.
3. Touch
again to confirm the hour and minutes will start
TIME
flashing.
+
4. Touch
or
-
to set the desired minutes value or hold the
key to change by 10 minute increments.
5. Touch
again or wait for 5 seconds in order to confirm
TIME
the time.
NOTE: The Time of Day can never be set if any time
function is already set: first delete all the active
time functions.
8 - Setting the Clock and Timer
To Set the Timer
1. Touch
TIME
+
2. Touch
or
or
begin flashing: continue until the desired value is set.
AM
PM
3. Touch
TIME
start flashing.
+
4. Touch
or
key to change by 10 minute increments.
5. Touch
TIME
the time.
6. "TIMER" will be continuously displayed.
7. When the time ends, reminder beeps will sound for 15
minutes or until the
8. Timer format is usually HR:MIN, switching into MIN:SEC
during the last minute.
9. The displayed value is always rounded to the lower minute.
For example: 2:43 is displayed as the timer counts from
2:43:59 to 2:43:00.
. The clock time will appear during all oven
AM
until the display shows the "TIMER" text.
-
to set the desired timer value, the hours will
again to confirm the hour, now the minutes will
-
to set the desired minutes value or hold the
again or wait for 5 seconds in order to confirm
key is pressed.
TIME
EN
13
Publicité
