Publicité
Les langues disponibles
Les langues disponibles
|
About This Manual
From initial concept and design through its final production, your Fill-Rite pump is built to give you years of trouble-free use. To insure it provides that service, it is critical that you
read this entire manual prior to attempting to install or operate your new pump. Become familiar with the terms and diagrams, and pay close attention to the highlighted areas
with the following labels:
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in moderate or minor injury.
NOTICE
Indicates information considered important but not directly hazard related.
At Fill-Rite, your satisfaction with our products is paramount to us. If you have questions or need assistance with your product, please contact us at 1 (800) 720-5192 or via email at
FillRiteTech@fillrite.com (M-F, 8 AM – 5 PM ET).
Safety Information
WARNING
Electrical wiring should be performed ONLY by a licensed electrician in compliance with local, state, and national electrical code NEC/ANSI/
NFPA 70, NFPA30, and NFPA 30A, as appropriate to the intended use of the pump. Threaded rigid conduit, sealed fittings, and conductor seal
should be used. The pump must be properly grounded. Improper installation or use of this pump can result in serious bodily injury, or death!
1.
2.
3.
4.
5.
6.
WARNING
This product should not be used to transfer fluids into any type of aircraft.
WARNING
This product is not suited for use with fluids intended for human consumption or fluids containing water.
Installation
The Fill-Rite FR700V Series pump is designed to offer several different mounting configurations. It can be mounted on a skid tank using the tank adapter supplied with the pump (see
attached diagrams) or mounted on a concrete island using an optional pedestal adapter (available through your Fill-Rite distributor). Regardless of mounting style, all tanks must be
properly vented.
The FR700V Series pump has a built-in check valve with pressure relief to reduce unsafe excess pressure from thermal expansion of the fluid. It also features an integral bypass valve to
help minimize wear when the pump is operating with the nozzle closed.
CAUTION
Do not use additional check valves or foot valves unless they have a proper pressure relief valve built into them. Note that additional check
valves will reduce flow rate.
fillrite.com
FR700V SERIES FUEL TRANSFER PUMPS
NEVER smoke near the pump, or use the pump near open flames when pumping a flammable liquid! Fire can result!
A "Fill-Rite" Filter should be used on the pump outlet to insure no foreign material is transferred to the fuel tank.
Threaded pipe joints and connections should be sealed with the appropriate sealant or sealant tape to minimize the possibility of
leaks.
Storage tanks should be securely anchored to prevent shifting or tipping when full or empty.
To minimize static electricity build up, use only static wire conductive hose when pumping flammable fluids, and keep the fill nozzle in
contact with the container being filled during the filling process.
The pump motor is equipped with thermal overload protection; if overheated, the motor will shut off to prevent damage to the
windings. If this happens, TURN THE PUMP OFF! When the motor cools, it will restart without warning if the power is on.
INSTALLATION AND OPERATION MANUAL
3
Publicité
