Gong SUP 1 SASU Guide De L'utilisateur page 36

H I P E L E A R N
→ Installation of the Race fin
The HIPE LEARN 6'5 and 8'0 are equipped
first sessions when gaining speed before flying.
❶
Slide the Nut inside the US Box towards the front of the Board.
❷
Place the Base of the Fin in the rail of the Box and
slide the Fin to the position of your choice.
→ Deflation
❶
To deflate the Board, open the Valve cover and
press the button to turn it down to «deflate.» Do
not be surprised by the air that escapes from the
Valve. Do not deflate your board on the water.
/ F R E E F L Y
with a 28cm fin that can be set up instead of the foil for your very
❸
❷
ANY QUESTIONS ? Contact our Team
gong-galaxy.com/aide-contact/
36
/ P E R F
Move the Nut so that it is facing the hole in the
base of the Fin, insert the screw, and tighten.
Roll up your Board carefully starting from the
back of the Board, pad towards the inside. Do
not tighten too close to the Fin box to avoid
generating tension.
EN