Gong SUP 1 SASU Guide De L'utilisateur page 35

❸
Slide your foil to the desired setting. Tighten all screws. Your board is ready for use.
GOOD TO KNOW:
>⃝●
If you're not using a GONG foil, you must completely unscrew your screws.
>⃝●
Note that the SCS inserts are compatible with all GONG foils. If you wish to foil with a different foil brand,
use the 4 individual non-opening inserts delivered with your screw kit.
→ Installation of the 4'6 Fin
The HIPE LEARN 6'5 and 8'0 are equipped with a box at the front of the foil to keep your heading when
you gain speed on the water before flying with the foil.
❶
Slide the Nut inside the US Box towards the front of the Board.
❷
Place the Base of the Fin in the rail of the Box and
slide the Fin to the position of your choice.
For disassembly, do the reverse.
❸
Move the Nut so that it is facing the hole in the
base of the Fin, insert the screw, and tighten.
35
GONG-GALAXY.COM