Gong SUP 1 SASU Guide De L'utilisateur page 32

H I P E L E A R N
→ Footstraps installation
The HIPE Learn and Perf are equipped with footstrap inserts dedicated
to the practice of Wing foil. For use in SUP foil, we recommend strapless
practice. Your footstraps are delivered with screws adapted to the depth of
the footstrap inserts and serrated plates to block their rotation.
>⃝● The screws M5x16 (FOOTSRAPS) are delivered in the repair kit.
❶
Lift the neoprene sleeve to access the holes in
the footstrap, which are designed to receive the
screws.
17 cm
Adjust the width of your footstrap by selecting the row of holes that fits the size of your feet.
For a tighter fit, use the middle rows, to loosen the footstrap, use the outer rows of the strap.
❸ CAUTION:
it is imperative to screw perfectly
vertically to the threads and above all not to
leave any sand in the threads before screwing.
You could cause non-repairable damage to the
threads.
/ F R E E F L Y
❷
17 cm
❹
32
/ P E R F
Position the serrated plate opposite the footstrap
insert. Use two screws for each end of the
footstrap and insert them into the external holes
of the serrated plate.
Repeat this procedure for the second strap.
EN
x5 x10
17 cm