Gong SUP 1 SASU Guide De L'utilisateur page 33

→ Screws and washers supplied
In order to be perfectly compatible with our different foil top plate models,
2 sets of screws. You can identify below the model of your foil's top plate and choose the appropriate
screws.
Make a test to make sure the strap is correctly
adjusted: the strap must be neither too loose nor too
tight: you must be able to slide your feet easily into the
straps and remove them easily too. But there should be
no gap between the top of your foot and the strap. They
must be in contact with each other. Note that the setting
must be changed if you practice with neoprene booties
or if you practice barefoot.
∙ Top plate Foil V2
4 x Screws M6 x 20 mm Torx Round head & 4 washers
2 x SCS Inserts for US BOX double entry
∙ Carbon mast
4 x Screws M6 x 25 mm Torx Round head & 4 washers
2 x SCS Inserts for US BOX double entry
33
GONG-GALAXY.COM
your HIPE is delivered with