Okay WM 5617 Traduction Du Mode D'emploi D'origine page 28

ENGLISH
24
Check all screw and plug-in connections and
protective equipment if firm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
Check the cutting equipment function. Cutting
units should only be replaced in pairs.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Do not overreach. Keep proper footing and balance
at all times.
When working, keep the appliance firmly with both
hands and with a distance from your body.
Turn the appliance on only when in a normal working
position. Do not incline the appliance when being
started.
Keep all body parts away from the cutting unit. Do
not attempt to remove cut material or hold material
to be cut when the trimmer mower is running. Only
remove jammed cut material when the equipment is
switched off.
Make sure your posture is safe, especially on slopes.
Do not cut on too steep slopes. Be particularly careful
when changing travelling direction on slopes.
Do not race when working with the appliance. Walk
slowly and cautiously.
Pay maximum attention when turning around and
pulling the appliance to you.
Be careful when going backwards – risk of trip-
ping!
Never cross any gravel roads or paths with the
running appliance. Switch the mower off whenever
carrying or inclining it or when being outside a grass
area. Wait until all rotating parts have stopped.
Do not start the engine before your feet are in a safe
distance from the cutting tools.
Stop the engine %and disconnect the spark plug wire,
make sure that all moving parts have come to a comple-
te stop and, where a key is fitted remove the key:
• To remove a blockage
• Before inspecting, cleaning, servicing or carrying out
any other work
• After striking a foreign body
• whenever you leave the lawnmower
• before refuelling
The ON/OFF switch and safety switch must not be
locked.
Machine to be stored in a dry place.
Maintenance
Switch the engine off and remove the socket
plug before any work on the engine. Wait until
all rotating parts have stopped and the
appliance has cooled down.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Replace any defective muffler.
Do not change the controlled engine setting and do
not rev the engine up.
Keep the appliance, especially the tank and engine,
clean at all times. Do not clean the plastics with
solvents, flammable or toxic fluids. For cleaning, use a
damp cloth only.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Important information for the customer
Please be sure to know that returning the product
in or after the warranty period must be made in the
original packaging.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bureau-
cracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com