Installing Updates For The Home Connect Software; Information On Data Protection; Declaration Of Conformity - Gaggenau RT282 Notice D'utilisation

Home Connect
en
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different home network (WLAN), the Home
Connect settings can be reset:
·
1 Press button.
Temperature display shows Cn.
Press Û button until temperature display shows rE.
2
3 Press + button.
Temperature display shows an animation for
15 seconds.
The temperature display then shows On.
The Home Connect settings have been reset.
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home Connect software.
If an update is available, the temperature display
shows UP.
Press any button to return the display to the set
temperature.
Install the update:
·
1 Press button.
Temperature display shows Cn.
Press Û button until temperature display
2
shows UP.
3 Press + button.
The temperature display shows an animation.
The update is installed.
All buttons are locked during installation.
– If installation was successful, temperature
display shows On.
– If installation was not successful, temperature
display shows Er.
Start the update again at a later time.
Inform Customer Service if installation has still
not been successfully completed after several
attempts.
34

Information on data protection

The first time your Home Connect appliance is
registered on the WLAN network connected to the
Internet, your appliance will transmit the following types
of data to the Home Connect server (initial registration):
▯
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
▯
Security certificate of the Wi-Fi communication
module (to ensure a secure IT connection).
▯
The current software and hardware version of your
domestic appliance.
▯
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note: Be aware that the Home Connect functions can
only be utilised with the Home Connect app. Information
on data protection can be called up in the Home
Connect app.

Declaration of conformity

Gaggenau Hausgeräte GmbH hereby declares that the
appliance with Home Connect functionality meets the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.gaggenau.com among the additional
documents on the product page for your appliance.
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
BE BG CZ
ES FR HR
y
HU MT NL
SK FI SE
5 GHz WLAN: for indoor use only
DK DE EE IE
IT CY LV LT
AT PL PT RO
UK NO CH TR
EL
LU
SI