Using The Programming Menus; Main Menu Options - Honeywell E3 Point Manuel D'utilisation

Using the Programming Menus

The programming menus provide a series of options that let you
customize your gas detection system. Press the enter key to access the
programming menus. If no buttons are pressed for 2 minutes, the unit
exits programming mode to normal operation.
CAUTION:
!
programming functions of this unit. Factory settings conform to specific
standards. See Specifications. Any changes made to Alarm Levels may
affect manufacturer's stated standards compliance.

Main Menu Options

Each menu option provides access to further sub-menus. Consult the
following pages of this manual for menu use instructions.
Menu Option
Password
Display
Relay
Buzzer
Alarm
Restore
Temp
SetZero
SetSpan
TestMode
Memory
Quit?
E Point Standalone Gas Monitor User Manual
3
Only qualified, knowledgeable personnel should use the
Description
Protects programming menus from unauthorized access.
Provides a choice of discrete display.
Defines whether the relays will be latched, failsafe or activated.
Provides a choice between activated or silenced.
Allows configuration of various alarm levels .
Restores the device's factory configured calibration settings.
Sets the maximum temperature level.
Sets the sensor zero.
Calibrates the sensor span.
Simulates events for testing purposes without affecting the
sensor readings. Used during installation.
Reserved for authorized Honeywell Analytics technicans only.
Exits the programming menus and returns the device to
normal operation mode.
Using the Programming Menus
15