Temp Menu - Honeywell E3 Point Manuel D'utilisation

Temp Menu

The Temp menu allows users to define the maximum temperature for
the device temperature alarm, which can be used to activate the device
connected to the relay.
Press enter to access the Temp menu, then select either Disable or
Enable.
• Use the arrow keys to select the temperature scale (either oC
or oF) and press enter to select (the underlined value). This
affects local display only and is not stored in memory—it is a
conversion aid.
• Use the arrow keys to increase or decrease the value to the
desired level and press enter.
An alarm (or relay) as chosen at programming time will be triggered
when the temperature reaches the specified level. TEMP LIMIT will
display on the LCD.
The temperature measured represents the unit's internal reading and
may differ from external temperatures by up to 10°C.
The unit does not display temperature readings.
E Point Standalone Gas Monitor User Manual
3
Using the Programming Menus
* Menu *
Temp
Temp
Enable
Limit
oC
Limit
50oC
21