Using The Programming Menus - Honeywell 90DM4 Manuel De L'utilisateur

Using the 90DM4
Programming Menus

Using the Programming Menus

Access to the 90DM4 programming is achieved through push buttons
located on the back of the device, accessible through an oblong cutout.
The left hand button opens access to programming functions and
validates selections (equivalent to an Enter button). The right hand
button scrolls through main programming screens and increases values
when in a specific programming screen.
• Hold the unit (facing you) in both hands
• Place both index fingers through the cutout until they touch the left
and right push buttons, respectively.
• Press the left button to access the programming menus
Since programming is password protected, you must login to gain
access to the menus (the default password is VA). In the Password
screen, the first letter is underlined, which indicates that it can be
modified.
• Press the right push button until the desired letter appears.
• Press the left button to validate the entry and move to the next
letter
• Press the right push button until the desired letter appears
• Press the left push button to validate the password and access the
menus.
18
Password
* AA *
90DM4 User Manual
Honeywell
511105
2/07