Sony STR-DA5200ES Mode D'emploi page 105

Setting audio/video output
signals to the zone 2/zone 3
1
Choose "Multi Zone" in the
Settings menu (page 54).
2
Press V/v to select the zone to
which you want to output
audio/video signals, then press
.
Main (this receiver) is always selected. If
you do not change the setting, proceed to
step 4.
3
Press V/v to select, "ON" or
"OFF" then press
4
Press V/v/B/b repeatedly to
select item and parameter, then
press
Multi Zone menu parameters
x Power
2-4
(for ZONE 2/ZONE 3 only)
Lets you turn zone operation on.
• ON
• OFF
x Input
Lets you select the source that is output to the
zone. Audio and video signals are output to
zone 2, only audio signals are output to zone 3.
x Volume
Lets you adjust the volume in the zones.
x 12V Trigger
You can turn the receiver on/off in another
zone, or select various options for use of the
12V Trigger function, as explained below.
• OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
• ZONE
Lets you turn the output of 12V triggers on
or off based on whether the selected zone is
turned on or off.
• CTRL
Lets you turn the output of 12V triggers on
or off manually using the CIS command of
the IR remote.
.
.
continued
105 GB