Direct Tuning - Sony STR-DA5200ES Mode D'emploi

Direct tuning

Enter the frequency of a station directly by
using the numeric buttons.
5
4
1
Connect a TV monitor to this
receiver.
Refer to "3: Connecting the monitor for
displaying menus" (page 19).
2
Turn on the receiver and the TV.
3
Press RECEIVER to enable
receiver operation.
4
Press ON SCREEN.
The menu list of this receiver appears on
the TV screen. Press MENU if the menu
list does not appear on the TV screen.
5
Press V/v repeatedly to select
"FM" or "AM," then press
b.
78
GB
2
6
Press OPTIONS.
7
3 Press V/v to select "Direct
Tuning," then press
8
Press the numeric buttons to
8
enter the frequency, and then
press
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5
5,
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
7-9
9
Press
6
Tip
If you have tuned in an AM station, adjust
MENU
the direction of the AM loop antenna
(aerial) for optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right
frequency. If not, repeat steps 8 to 9. If you still
cannot tune in a station, the frequency is not
used in your area.
or
.
to enter.
.