Télécharger Imprimer la page

Gaggenau DF 280 760 Notice D'utilisation page 12

Publicité

Les langues disponibles

Les langues disponibles

en-us
Getting Started
The numbers stated below refer to the overview images
on the previous page of this manual.
Operating panel
( On/Off button
0 Wash cycles**
8 Info button (
@ Digital display
H Rinse aid refill indicator
P Salt refill indicator
X Selection buttons
` Time preselection
h Wash cycle options**
)" START button
)* < > button
**number of wash cycles and options varies on specific
model number
Dishwasher interior components
1" Interior light *
1* Third rack*
12 Upper rack
1: Upper spray arm
1B Detergent tab tray
1J Lower spray arm
1R Dispenser for special salt
1Z Filters
1b Silverware basket *
1j Lower rack
9" Rinse aid dispenser
9* Detergent dispenser
92 Lock for detergent dispenser
9: Rating plate
* optional feature which may or may not be included with
your dishwasher
12
Info button (
The Info button ( can be used to display additional wash
cycle information.
1.
Press the Info button ( 8.
2.
Press the wash cycle button.
Information on the selected wash cycle is indicated
on the display window at the top @.
To leave, press Info button ( 8.
3.
Time setting
When the appliance is switched on for the first time, the
time starts at 12:00 o'clock.
Set the time as follows:
1.
Open the door.
2.
Switch on ON/OFF switch (.
3.
Press Info button ( 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with t 3 sec.
4.
Keep pressing button > )* until the time setting is
indicated on the display window at the top @.
5.
Make the setting with setting buttons + - X. If the
selection buttons + - X are held down, the set
values are changed in 10-minute increments.
6.
Press and hold the Info button ( 8 for 3 seconds.
The selected setting has now been stored.
Note: If the appliance was disconnected from the power
supply for a prolonged period, the time starts at 12:00
o'clock. Set the time.

Publicité

loading